Seite 14 von 19
AMG Sicherheitstechnik GmbH
Industrial Park Road A-9
39245 Gommern
Phone 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
www.amg-sicherheitstechnik.de
Business hours are 8-17 clock, outside this time an answering machine is switched
*) free of charge from the German fixed network and all German mobile networks
Press in the right column „autoadd“.
If the camera images do not appear after a few seconds, click on "Update" and then run
the process again by clicking on "autoadd". Now all camera images should be displayed.
If this does not happen then please do the "Manual Add".
Manually adding the cameras
Disconnect the LAN cable from the DSL router and connect it directly to the camera and
the wireless LAN DVR (WAN port).
Call video management menu with right mouse button.
As the next step in the lower table, select the channel to be populated with a new
camera.
Example: "Channel 2" should / was replaced and must now be re-taught. Power the
camera -> set the network cable between the recorder and the camera -> use the mouse
to highlight "Channel 2" -> delete channel -> then press the "Coding" button in the
upper table.
The coding is now created and the data is transmitted
via LAN cable to the camera.
If everything was transferred correctly, the MAC address of the camera is connected
successfully in the adjacent table.
If you would like to teach in a second camera, then plug the LAN cable into the second
camera after the MAC address of the 1st camera appears in the table. You end the
teaching process, if all cameras (MAC addresses) are all in the right table by clicking on
"Output"
