AMF REECE S100 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 93

AMF REECE S100 Скачать руководство пользователя страница 8

S100

1-3

Revised 10/2005
e-mail: [email protected] ; [email protected] ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606

3 . I N S T R U C T I O N F O R S A F E T Y O F W O R K

The sewing machine S -100 is designed and produced to be highly reliable. Special attention is given for
securing of the service simplicity and effective safety protection of the operators and machine maintenance.

The machine S -100 has safety appliance which protects operator but also machine and respects valid
safety and hygienic rules for usual technological using of the machine. These safety appliances include plug
of supply, operating switch (circuit breaker) and covers.

There are safety labels placed on the machine for warning for supplementary danger. Do not remove and
damage these labels. When the label is damaged, order the new one. The said precautions can not cover all
safety aspects that is why operator before using of the machine has to read and understand to this instruc-
tions. The mistakes will be eliminated during machine installation and during its own operation. Do not try
to put the machine into operation without reading all the machine instructions and until well understanding to
every function and progress.

There are three types of safety direction in these instructions:

D A N G E R !

Possible loss of life.

WA R N I N G !

Possible serious injury or machine damage.

N O T I C E !

Possible injury or machine damage.

It is

recommended to service workers from AMF Reece oversaw to the installation and initial training of

mechanics and operators.
Strictly given safety program, which part is the direction for safety operation, is the most effective security of
the workers safety during the operating with the machine. The secure work with the machine is ensured by
the safety covers which are useful, if they are mounted and fixed correctly. The warning labels and service
must be done according to the instructions. Operators and service workers should wear safety goggles.

A - INTRODUCTION

«
...
6
7
8
9
10
...
»

Содержание REECE S100






























































































Отзывы:

Нет отзывов