1-64
S100
Revised 10/2005
e-mail: [email protected] ; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
1.
Lift the pawl
and remove the stud from the eye of the
spring . Loosen the nut
and tighten the screw
, so that
after the drive
travel on the rod
, the block of the stopping
mechanism will be reliable loosen.
2.
To adjust an equal length of the first and second row of stitches,
loosen the screw
and shift the drive
.
If the second row of stitches is longer, move the drive
backwards (in direction to the operator), if is the second row of
stitches shorter, move the drive forward to the operator.
( W I T H O U T B A R )
6. R E A D J U S T M E N T O F T H E M A C H I N E S 1 0 0 - 0 6 0 ( C R O S S B A R ) T O
T H E M A C H I N E S 1 0 0 - 0 3 0 ( F LY B A R )
1.
At first, disable the cross bar sewing mechanism according to
chapter
G 6
.
2.
Replace the cam
for the cross bar sewing, to the cam from
the accessories, as needed (with eye, without eye, and with
needed length).
3.
Replace the cam - according to chapter
D 5 .
4.
Use the eccentric stud
to
move the lever
to the position,
when is the lever prevent from movement.
The lever is lifted.
C A U T I O N !
Make sure, that the knifes, washers and cams are
always in harmony.
7. H A N D F E E D I N G
It is possible to remove the hand crank drive
on the machine
S 100 - 060 which is different from the other machines.
The hand crank drive is not serve for the operator, but for the
mechanic use only.
C A U T I O N !
During the sewing the cross bar is the hand stop sewing
lever locked for use, at the beginning and at the end of sewing, when
the cycle of sewing cross bar cannot be interrupt. So in case of necessity
to stop the sewing, stop the machine by foot pedal. Remove the fabric
before it is cut, and by short squeeze of the stopping lever, interrupt the sewing and press the foot pedal to
finish the cycle by motor.
F -MACHINE ADJUSTMENT - CROSS BAR
5. R E A D J U S T M E N T O F T H E M A C H I N E S 1 0 0 - 0 6 0 ( C R O S S B A R ) T O
T H E M A C H I N E S 1 0 0 - 0 3 0