ES-505
1-81
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
11.2.
KNIFE AND CUTTING STEEL SET UP – STANDARD:
CAUTION
!
Knife end stops
4
are preset from the manufacturer and secured
with screws
5
. Screws
5
are marked with yellow color and they
cannot be loosen during the warranty period.
Knife
1
fixed in cutting block
2
has to be set up in correct position
with the cutting steel
6
.
Loosen the screws
3
and with a gentle tapping move the cutting
block
2
to the left or to the right (in X axis ) as needed.
Once the cutting block is set up
2
in the right position, tighten the
screws .
Loosen the screws
5
. Adjust the knife end stop
4
(in Y axis) in
cutting block
2
at 78 mm from the needle. Tighten the screws
5
.
Check the adjustment as in chapter
E 11.1
.
