ES-505
1-38
D - MACHINE CONTROLS
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
2.3. SETTING BUTTONHOLE PARAMETERS
Buttonhole parameter screen enable setting of buttonhole parameters as well as the way of their sewing. Before the
initial sewing of the buttonhole, it is necessary to set parameters of the eye, first and second raw of stitches and the
ending (type of bar). Furthermore cutting and sewing speed parameters need to be set.
2.3.1. SETTING EYE PARAMETERS
Press the button
1
on the main screen or the button
2
on the main screen of the round buttonhole. The screen with
eye parameters comes up. You can choose a buttonhole without eye, with eye or round buttonhole.
If you press the button
3
, buttonhole without eye is activated.
Pressing any of the buttons
4
, indicates that the buttonhole with eye is active. As you can see from individual buttons
marking, following eye sizes can be set: 2,2x3,0; 2,8x4,2; 3,0x4,6; 3,2x5,0 or 3,4x4,2 (all in mm).
In that case set eye parameters as fololows:
Press the button
6
and correct the number of stitches in the eye. Range 4 - 20.
Press the button
7
and flatten or stretch the eye. Range -2.0 +3.0 mm.
Press the button
8
and choose angle from the vertical axis of the buttonhole. Range ± 1.0.
Press the button
9
and specify feeding in the eye (stitch angle in the eye) Range 50 - 100 %.
Pressing the button
5
, round buttonhole is selected. This is only possible at AF model. For detailed setting of round
buttonhole parameters see chapter
D 2.3.2. and D 2.5
.
For model type selection see chapter
E 2.6.1
.
