Faults and Troubleshooting
Page 42 of 60
Easy Ramp and EasyFlex Ramp
7
Faults and Troubleshooting
WARNING!
Risk of severe injury and material damage if repair work is
carried out incorrectly.
Therefore:
Only allow specialist personnel to carry out repair work.
If faults occur when operating the access ramp, proceed as
described in the following troubleshooting table. Contact the
customer service department if faults are encountered
which cannot be remedied using the information and
measures given in the table.
7.1
Troubleshooting Table
Fault
Possible Cause
Remedial measures
The ramp does not de-
ploy or stow correctly.
Foreign objects blocking the
latching mechanisms.
Inspect the latching mecha-
nisms and remove foreign ob-
jects, clean the latching
mechanisms if necessary.
A spring-loaded latch is defec-
tive.
Check the spring-loaded
latches and replace if neces-
sary.
One or more of the gas-oper-
ated struts is/are defective.
Check the gas-operated
struts and replace them if
necessary.
The access ramp mechanism is
misaligned.
Have the access ramp mech-
anism re-aligned.
The ramp is difficult to
lock in the vertical
position.
The access ramp has too little
play.
Adjust the ramp’s play (see
Section 7.2, page 43).
The access ramp
rattles when the vehicle
is in motion.
The access ramp has too much
play.
Adjust the ramp’s play (see
Section 7.2, page 43).
The electrically oper-
ated belts cannot be
pulled out.
The rocker switch is defective.
Have a new rocker switch fit-
ted.
The fuse has blown.
Replace the fuse in the vicinity
of the battery.
The electrically operated belts
are defective.
Have the electrically operated
belts replaced.