Transportation
Easy Ramp and EasyFlex Ramp
Page 21 of 60
2.3
Technical Data
Designation Easy
ramp
EasyFlex ramp
Maximum load (wheelchair use)
350 kg
Maximum load (EasyFlex ramp
stowed position, luggage compart-
ment)
100 kg
3
Transportation
Transportation of the access ramp is carried out by the
manufacturer or by trained, experienced personnel.
4
Installation / Commissioning
The access ramp must be installed in accordance with the
AMF-Bruns Installation Instructions applicable to the vehicle
in question.
DANGER!
Danger through incorrect installation.
A number of risks of personal injury and material damage
can be caused if the access ramp is incorrectly installed in
the vehicle.
Such risks can not only occur during installation but also as
a result of installation not being carried out correctly.
Therefore:
the access ramp must only be installed by specialist per-
sonnel, who have been trained for this job by the manu-
facturer. This also applies to the electrical connections.
The vehicle manufacturer's body fitting guidelines must
be adhered to.
A technical expert must be called in to inspect the access
ramp for correct installation and the effectiveness of the
safety devices.
The technical expert must confirm the fact that opera-
tional safety of the access ramp has been established by
making a corresponding entry in the inspection log book
(see Chapter 8, page 45).
The access ramp must not be used until this has been
done.