Ametek Powervar 3400 Series Скачать руководство пользователя страница 62

Страница: 62 / 68

A01-00119 Rev. B

for incidental or consequential damages, monetary loss, loss of sales, or

loss of business resulting from the failure or malfunction of the Product.

Warranty is void on Product where evidence of tampering exists.

Improper long-term storage may damage the UPS batteries and

invalidate the battery warranty. Disconnecting a UPS from its AC utility

power source for an extended period of time results in lost battery

charge. To keep the batteries fully charged and maximize the life of the

batteries, connect the UPS to an AC power source while it is in storage.

If this is not possible, the UPS must be connected to a power source for

24 hours at least once every 4 months, or every 2 months if the ambient

temperature is more than 30°C (86°F).

Additionally, Powervar’s warranty on batteries applies only to Products

that are continuously connected to AC mains power, except during

utility power outages. Products that are regularly and intentionally

disconnected from AC mains power will experience battery discharge/

charge cycles that are potentially far more numerous than those for

which the battery was designed. As a result, Products used in such

applications will experience substantially reduced battery life. Therefore,

Powervar’s standard warranty term does not apply in these cases and is

supplanted by a 90 day warranty from time of shipment from Powervar.

The warranty provided by Powervar provides for the replacement of the

battery or battery systems in the event that the batteries do not meet the

performance specifications as determined by Powervar exclusively.

All warranty services will be performed during Powervar normal, non-

holiday business hours (Monday through Friday, 8:00 AM – 5:00 PM

CST). Any service required by Customer to be performed outside of

normal business hours will be subject to Powervar’s prevailing labor

rates.

Содержание Powervar 3400 Series





































































Результаты поиска

Содержание Powervar 3400 Series

Отзывы:

Бренды по названию

Популярные бренды

Ametek Powervar 3400 Series, Руководство пользователя

Результаты поиска

Содержание Powervar 3400 Series

Отзывы:

Бренды по названию

Популярные бренды