Ametek Powervar 3400 Series Скачать руководство пользователя страница 53

Страница: 53 / 68

A01-00119 Rev. B

4.0 MAINTENANCE GUIDE

This chapter discusses the user maintenance responsibilities of the

UPS, including safety precautions, periodic preventative maintenance,

battery maintenance, and fan maintenance. Proper maintenance is

essential for the long term overall life of the UPS.

4.0 Safety Precaution

Please observe the following safety precautions:

• Please remember that there are hazardous lethal voltages within

the UPS even if the UPS is not running. Operate this UPS in strict

accordance with safety procedures, if in doubt, please defer to

factory authorized service personnel.

• Keep the environment clean and avoid dust or chemical

contamination of UPS.

4.1 Periodic Preventative Maintenance

To improve the efficiency and reliability of the UPS system, please

perform the following preventative maintenance operations (every 3

months):

• Visually examine the input and output terminals to ensure solid

connections.

• Visually examine the fans to confirm working status. Be aware

of foreign materials clogging fans. To ensure proper ventilation.

If fans are clogged or running slowly, please contact your factory

authorized service provider immediately.

• Periodically check data logs to examine the system running status.

This will provide the user with any fault or shutdown information.

4.2 Battery Maintenance

Battery maintenance and servicing should only be performed by factory

authorized service providers.

Содержание Powervar 3400 Series





































































Результаты поиска

Содержание Powervar 3400 Series

Отзывы:

Бренды по названию

Популярные бренды

Ametek Powervar 3400 Series, Руководство пользователя

Результаты поиска

Содержание Powervar 3400 Series

Отзывы:

Бренды по названию

Популярные бренды