Ametek Powervar 3400 Series Скачать руководство пользователя страница 51

Страница: 51 / 68

A01-00119 Rev. B

3.1.2 UPS Testing

Test UPS: close the main input supply switch and start the UPS. Once

the UPS is operating normally and stay in inverter mode, check to

ensure the DC polarity and battery voltage is correct. If DC voltage and

polarity are correct, close the battery breaker. Disconnect the AC input

to simulate a power outage. The UPS will seamlessly switch to battery,

causing the on-battery alarm notification. Open the battery breaker to

simulate a battery low voltage condition. The UPS will switch to bypass

output, and the alarm will be constant.

Precautions for Operating UPS

• To prevent an OL condition, please be sure that the load is within

the capacity of the UPS.

•

Do not use the On/Off function of the UPS to turn on/off your load.

If UPS hasn’t been in use for a long period of time, the operational

prechecks will need to be repeated.

Operation

3.1.3 Start UPS

Please perform the following steps to start the UPS.
Step 1 Apply AC to the UPS.
Step 2 Close input supply breaker or disconnect.

If AC supply is within specs, Press the ON buttons on the panel for

1S, the rectifier will start automatically, 30S later, the DC bus voltage

increase to within spec, the rectifier indicator (AC/DC) on the panel will

be illuminated. The inverter will star after 10S, and 30s later, the output

voltage will supply any applied load.

Step 3 Close the external input switch of battery.

Check the polarity and voltage of battery is correct, if so, close the

battery switch.

Содержание Powervar 3400 Series





































































Результаты поиска

Содержание Powervar 3400 Series

Отзывы:

Бренды по названию

Популярные бренды

Ametek Powervar 3400 Series, Руководство пользователя

Результаты поиска

Содержание Powervar 3400 Series

Отзывы:

Бренды по названию

Популярные бренды