Portable Thermometers
Cyclops L
USER CONFIGURATION
RECORD
14
The
Cyclops
can be configured to suit your measurement requirements. Your
chosen parameter settings and values are stored in the thermometer’s memory.
If the thermometer is returned to AMETEK Land for repair or recalibration,
it is possible that your stored user settings may be overwritten and the
thermometer returned to you with the factory default settings.
Therefore, it is recommended that once you have set up the thermometer to
match your measurement requirements, you use the User Configuration Record
to make a note of your chosen parameter settings and values, so that these can
be re-entered into the thermometer and used again.
Serial Nº
.............................................................
Date:
.............................................................
Measurement Mode:
Peak
q
Instantaneous
q
Averaged
q
Valley
q
Menu Mode:
Emissivity (value) ....................
Data Output Mode:
Classic
q
Burst
q
Latched
q
Alarm Settings:
Alarm off
q
High alarm
q
(value) ....................
Low alarm
q
(value) ....................
Averager setting:
Slow
q
Mid
q
Fast
q
Temperature units:
°C
q
Backlight Setting:
Off
q
Dim
q
(timer) ....................
Bright
q
(timer) ....................
Sounder Setting:
Off
q
On
q
Window transmission: Off
q
On
q
(value) ....................
Bluetooth
:
Off
q
On
q
User Guide
14 - 0
