Portable Thermometers
User Guide
Cyclops L
9 - 2
9.1 Operation (Example 1: simple temperature measurement)
1)
Switch the thermometer on via the On/Off switch. The initialisation screen
will appear and, after a few seconds, the screen will change to show the
measurement mode display.
2)
Check the battery status, ensure that there is sufficient battery life remaining.
3)
If the trigger mode is not already set to
Classic Mode
, go into
Menu Mode
, open the
Trigger Mode
menu and select
Classic
Mode
.
4)
Enter the
Emissivity
value for the material under observation
(refer to the information in Section 11).
5)
Ensure that
Window Compensation
is
Off
.
6)
Ensure that the
Alarms
function is set to
Off
.
7)
Ensure the
Bluetooth
option is set to
Off
.
8) On the side display, select the
Instantaneous
temperature measurement
option (see Section 7.2).
9) Adjust the eyepiece to suit the user (See Section 6.3), then aim the
thermometer at the target and, using the lens focus adjustment (See
Section 5.5), focus the graticule onto the area under observation. Check
that the graticule is fully filled by the target, re-position if necessary.
10) Press the trigger to start measurement. The main display and eyepiece
display are updated with the reading
11) Release the trigger to stop measurement and freeze the last recorded
value on the main display.
