10
Humidity: 10% to 95% RH Non-condensing
Pollution: Degree II
Mechanical
Dimensions: 11.4 x 12.7 (cm), depth = 3.7 cm (4.5 x 5 (in), depth= 1.5 in)
Pressure Connection: ¼” NPT Male
Housing: cast ZNAL, meets NEMA 4/IP65
Display
5-1/2 Digits, 0.65” (16.53 mm) high
20-Segment bar graph, 0 to 100%
Power
Battery: three (3), size AA alkaline batteries
Battery Life: 1,500 hours without backlight, 2,000 hours at slow sample rate
Low Battery Indicator icon is displayed near the end of battery life
9.0 Service Center Calibration or Repair
Only qualified service personnel should perform calibration, repairs, or
servicing not covered in this manual. If the calibrator fails, check the
batteries first, and replace them if needed.
Verify that the calibrator is being operated as explained in this manual. If the
calibrator is faulty, send a description of the failure with the calibrator. Be
sure to pack the calibrator securely, using the original shipping container if it
is available.
Содержание JOFRA IPI Mk. II
Страница 1: ...User Manual Industrial Pressure Indicator AMETEK JOFRA IPI Mk II...
Страница 18: ......
Страница 19: ...SPK IPI 004 0200044 Rev A ATEX 10 12...