Ametek DTI 100, Руководство пользователя

Страница: 17 / 33

16/32 11-06-2001 100975 05
5.3.6 Checking sensor coefficients
In order to check the sensor ID and coefficients on the DTI, press the softkey
<MENU/Enter> 4 times. The following message will be shown in the display:
SENSOR 1: 9402244
R0
: 1.002
Use the softkey <Reset/SELECT> to scroll through the coefficients:
(example with both sensors using default coefficients)
SENSOR 1: 9402244 SENSOR 2: 9402246
R0 : 1.002 R0 : 1.002
│ │
SENSOR 1: 9402244 SENSOR 2: 9402246
A : 3.9080200E-03 A : 3.9080200E-03
│ │
SENSOR 1: 9402244 SENSOR 2: 9402246
B : -5.8020000E-07 B : -5.8020000E-07
│ │
SENSOR 1: 9402244 SENSOR 2: 9402246
C : -4.2735000E-12 C : -4.2735000E-12
Use the softkey <Menu/ENTER> to leave this menu.
The coefficients are used in the equations:
Below 0
°
C:
Above 0
°
C:
5.3.7 Light
By pressing the softkey <Light> 1 time, the light will be switched on in the display for about
10 seconds. By pressing the softkey 2 times in a row the light will stay on. The light is
switched off by pressing the softkey again.
)
t
100) - (t C +
t
B + t A + (1
R
= R(t) 3 2
0
⋅ ⋅ ⋅ ⋅
)
t
B + t A + (1
R
= R(t)
2
0
⋅ ⋅ ⋅