10/32
11-06-2001
100975
05
5 Operation
5.1 Operating area
Both of the DTI models are intended for use in areas which meet the following:
Temperature range
:
0
°
C/32
°
F to 50
°
C/122
°
F
Humidity
:
0% to 90%
Protection class
:
IP20
WARNING:
Do not use in hazardous areas!
5.2.1 Connection of sensors
The sensor should be connected to the terminals as shown in the figure below:
Use the ground terminal (see the figure "Overview" section 3, pos. 3) for the cable shields in
order to reduce noise.
The connector type to extra connector on DTI-1000 is: LEMO FFA 1S 304 CNAC.
