background image

Support

 

 48

nVision Operation Manual

„„„„

„

CONTACT US

USA

Crystal Engineering • 

California

*

Tel +1 (800) 444 1850
Fax +1 (805) 595 5466

[email protected]

Mansfield & Green • 

Florida

Tel +1 (800) 527 9999

[email protected]

United Kingdom

Tel +44 (0)1243 833 302

[email protected]

France

Tel +33 (0)1 30 68 89 40

[email protected]

Germany

**

Tel +49 (0)2159 9136 510

[email protected]

Denmark

***

Tel +45 4816 8000

[email protected]

India

Tel +91 22 2836 4750

[email protected]

Singapore

Tel +65 6484 2388

[email protected]

China

Shanghai

Tel +86 21 5868 5111

Beijing

Tel +86 10 8526 2111

 

Guangzhou

Tel +86 20 8363 4768

[email protected]

*

ISO 17025 accredited calibration lab, (A2LA #2601.01).         

**

DIN EN ISO / IEC 17025 accredited calibration lab.           

***

DANAK EN ISO/IEC 17025 accredited calibration lab.

If calling, have ready the model number, serial number, date of purchase, and reason for return. You will receive instructions for returning the device to us.

„„„„

„

TRADEMARKS

This manual contains the following third-party trademarks, both registered and unregistered. All marks are the property of their respective companies.

Rayovac® and Maximum Plus™  . . . . . . . . . . . . . . . . .Rayovac Corporation 

Duracell®  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Duracell Inc. Corporation

Energizer® and Eveready  . . . . . . . . . . . . . . . . . . . . . . .Eveready Battery Company, Inc.

“Pressure is Our Business” is a registered trademark of Crystal Engineering Corp.

„„„„

„

WARRANTY

Crystal Engineering Corporation warrants the nVision Reference Recorder to be free from defects in material and workmanship under normal use and service 
for one (1) year from date of purchase to the original purchaser. It does not apply to batteries or when the product has been misused, altered or damaged by 
accident or abnormal conditions of operation.

Crystal Engineering will, at our option, repair or replace the defective device free of charge and the device will be returned, transportation prepaid. However, if 
we determine the failure was caused by misuse, alteration, accident or abnormal condition of operation, you will be billed for the repair.

CRYSTAL ENGINEERING CORPORATION MAKES NO WARRANTY OTHER THAN THE LIMITED WARRANTY STATED ABOVE. ALL WARRANTIES, INCLUDING IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED TO A PERIOD OF ONE (1) YEAR FROM THE DATE OF PURCHASE. 
CRYSTAL ENGINEERING SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT, TORT OR OTHERWISE.

Note:

  (USA only) Some states do not allow limitations of implied warranties or the exclusion of incidental or consequential damages, so the above limitations 

or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Содержание Crystal Pressure nVision




















































Отзывы: