L-Series and FCS-18- Graphical User Interface User Manual
90
California Instruments
Rev D – March 2011
12.1 Setup files (.stp)
Setup files are given the default extension 'stp' which is short for setup.
Setup files have only limited use in the LSGUI program as most of the setting
for the program are dictated by the hardware configuration data and active
steady state settings reported by the connected L-Series unit. As such, they
are more useful for use in the simulation mode.
The setup file format is supplied here only for reference purposes. We do
not recommend editing setup files with a text editor as the likelihood of
generating errors is great. Setup files are comma separated value ASCII text
files that conform to the following format :
Field Type Description
Record 1
Program data
field 1
string
program name
field 2
string
program version and date
Record 2
Interface data
field 1
decimal
interface mode
field 2
decimal
IEEE address
field 3
decimal
L-Series model number id
field 4
decimal
Controller type
Record 3
Configuration data
field 1
decimal
maximum frequency limit
field 2
decimal
minimum frequency limit
field 3
decimal
low voltage range
field 4
decimal
high voltage range
field 5
decimal
maximum current limit
field 6
decimal
power level
field 7
boolean
output drop switch
field 8
boolean
output relay
field 9
boolean
square wave option
field 10
decimal
configuration word value
field 11
decimal
phase angle phase C
field 12
boolean
MIL-STD-704D test option
field 13
boolean
RTCA/DO-160 test option
field 14
decimal
phase mode
field 15
decimal
dual range mode
field 16
decimal
power measurement decimal point
field 17
decimal
current measurement decimal point
Record 4
Initial settings
field 1
decimal
frequency
field 2
decimal
voltage
field 3
decimal
current limit
field 4
decimal
voltage range
field 5
decimal
waveform type
Содержание 12000L
Страница 2: ......
Страница 3: ......
Страница 4: ......
Страница 6: ...ii This page intentionally left blank ...