Ametek Land Fti-E, Руководство по установке

Страница: 7 / 30

Section 1
Page 1 - 1
Fixed Thermal Imaging System Installation Guide
1 Introduction
This Installation Guide gives instructions on how to install the Land Fixed
Thermal Imaging System incorporating FTI-E cameras.
There are two systems covered in this Installation Guide:
•
FTI-E Fixed Thermal Imaging System
• SDS-E Slag Detection System
These instructions are provided as a series of simple installation diagrams,
covering the installation of the FTI-E and SDS-E thermal camera and its
mountings, accessories and services.
The only installation difference is the standard FTI-E enclosure is shown in
Fig. 2, whereas the SDS-E rugged enclosure is shown in Fig. 3.
Appendix A gives specific installation precautions and specifications for the
SDS-E Slag Detection System.
The equipment must be used, maintained and serviced by properly trained
personnel, capable of following the procedures given in these instructions.
Safety may be impaired if the system is not used as indicated.
It is important to check the equipment with which you have been supplied
and then read these instructions thoroughly before proceeding with operation.