Ametek Land Fti-E, Руководство по установке

Страница: 10 / 30

Section 1
Page 1 - 4
Fixed Thermal Imaging System Installation Guide
1.2 General Precautions
If the camera is operating in ambient temperatures in excess of 40°C / 105°F,
or if the system is exposed to high levels of radiant heat, a water-cooled plate
or air cooling system must be used.
The air purge is highly recommended to provide a clean window on the
environmental enclosure.
Caution
Do not use the system in an atmosphere containing corrosive dust or
mists.
1.3 Maintenance
The body of the thermal imager can be cleaned by wiping it with a clean cloth
moistened with either water or a mild, neutral detergent. Windows can be
cleaned by wiping them with a lens tissue. For stubborn dirt on the lenses
a lens cleaner may be used if desired. DO NOT use alcohol, chemicals or
abrasive cleaning products.
The recommended calibration interval for this system is 12 months. Hoses
and pipes should also be checked for leaks, cracks, chaffing and other wear
and tear.