Ametek Land 4750-PM, Руководство пользователя

Страница: 38 / 64

User Guide 5 - 2
Particulate Measurement System 4750-PM
5.1.2 Menu Options
Two menus are available, the Standard menu and the Engineering menu.
The range of accessible functions in each menu can be found in the relevant
menu section (see Sections 5.2 and 5.3).
NOTE
If a password has been set, you must enter the password before
you can change any of the settings (See Section 5.2.2)
5.2 Standard Menu
The following procedures introduce the principles that apply to all settings
functions in this chapter. The range of essential functions available in the
standard menu is shown in the below menu map. If required, set the jumper
to LK4 (default) and press the RESET button to display this menu (see item
1, Fig. 3-3 on Page 3-3).
5.2.1 Standard Menu Map (Flow Diagram)
Fig. 5-1 Menu map – Standard menu
The Standard menu can be navigated and settings can be changed using the
internal user controls. The DUST menu setting provides access to all current
readings available on the instrument: the dust measurement reading and the
sensor check results (for Zero, Span, and Flow, if available).