Amersham Biosciences Hoefer DALT Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 70

Amersham Biosciences Hoefer DALT Скачать руководство пользователя страница 3

Amersham Biosciences

Important User Information

Please read this entire manual to fully understand the safe
and effective use of this product.

The exclamation mark within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in
the literature accompanying the instrument.

If you have any comments on this manual, please send them to us at:

Amersham Biosciences Inc.

Marketing Department
654 Minnesota Street
San Francisco, CA 94107 USA

Amersham Biosciences reserves the right to make changes in the specifications

without prior notice.

Warranty and Liability

Amersham Biosciences guarantees that the product delivered has been thoroughly

tested to assure that it meets its published specifications. The warranty included in the
conditions of delivery is valid only if the product has been installed and used according to

the instructions supplied by Amersham Biosciences.

Amersham Biosciences shall in no event be liable for incidental or consequential

damages, including without limitation, lost profits, loss of income, loss of business oppor-
tunities, loss of use and other related exposures, however caused, arising from the faulty
and incorrect use of the product.

© 1998

Amersham Biosciences Limited.

All rights reserved.

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, without permission in written form from the company.

English

«
1
2
3
4
5
...
»

Содержание Hoefer DALT







































































Отзывы:

Нет отзывов