AmeriGlide STRATOS, Руководство пользователя

Страница: 10 / 24

STRATOS WITH ENCLOSURE:
Owner’s Manual
25MAR2022 | 630-00146 B
10
OPERATION
STRATOS WITH ENCLOSURE: SECTION 3
2.
Remove the plastic cap to access the manual
override. See Figure 3-4.
Cap
Manual
Override
Figure 3-4
3.
Use the provided 1/4" socket with a 3/8"
ratchet or a cordless drill. Power the drill in
the forward direction - rotating clockwise
to lower the platform. An extension may be
required. See Figure 3-5.
Figure 3-5
NOTE: The drive motor is equipped with a low holding
force brake to prevent the platform from drifting with
heavy loads. Lowering the platform with this brake on will
require a bit of strength, typically the equivalent of being
able to lift 20 lb with one arm.
NOTE: Do not attempt to raise the platform. The required
torque to do so is substantially higher.
4. Stop rotation when the platform is level with
the lower landing.
5.
If the lower door does not open, the
crescent key can be used to release it.
Wait for a AmeriGlide dealer to service and inspect
the lift prior to using it again.
WARNING !