AmeriGlide STRATOS, Руководство пользователя

Страница: 7 / 24

STRATOS WITH ENCLOSURE:
Owner’s Manual
25MAR2022 | 630-00146 B
7
OPERATION
STRATOS WITH ENCLOSURE: SECTION 3
SECTION 3
OPERATION
HOW THE AMERIGLIDE
STRATOS WORKS
The AmeriGlide Stratos Vertical Platform Lift is AC
powered via 115V AC, 15A, single phase, 60Hz. It is
available with an optional “Battery Backup” system
for instances where the AC power goes out.
The lift is interlocked and will not operate unless all
auxiliary gates and appropriate safeties are engaged.
The lift will raise or lower once a control input is
activated - whether from a call station or from the
platform. The platform controls will always override
a call station. In either case, a control switch must
be continually pressed for the platform to move.
The lifting/lowering of the platform is achieved with
a 2/3 hp electric motor and gear box driving an ACME
screw. That screw system connects to the platform
carriage which in turn supports the platform. The
platform automatically stops at the desired landing.
The lift has several advanced safety systems based
on the status of various sensors and switches
located in the tower and at landings. Once a lift is at
a landing, the gates/doors will be unlocked and are
able to be opened.
LIFT OPERATION
CALL/SEND
If the platform is not at your desired landing,
you will need to “call” or “send” for it. A Call/
Send Control is located at the landing or in the
gate frame. The Call/Send Control may have a key
lock. Please ensure the key is rotated to the “On”
position. Then, to call or send the platform, simply
press the Up or Down button, continuously, until the
platform comes to a full stop at the desired landing.
If unit has 3-Stops (landings) the mid landing Call/
Send will “call” the platform to you when both the
up and down buttons are pressed simultaneously.
NOTE: There is a short delay in pressing any call send
button before the lift reacts.
ENTERING THE PLATFORM
Enter the platform either by opening the door
towards you or moving through the opening. Move
to the center of the platform while closing the door
behind you. If your mobility device has a brake,
make sure to engage it. See Figure 3-1.
Figure 3-1
Prior to every use, please be sure to look around
the lift for any signs of damage. Visually inspect
anchoring bolts and tower braces and make sure
that they are securely in place. Do not use lift if
there are any missing or damaged fasteners or other
components, they need to be replaced by a qualified
technician to ensure continued safe operation.
CAUTION !