AmeriGlide STRATOS, Руководство пользователя

Страница: 5 / 24

STRATOS WITH ENCLOSURE:
Owner’s Manual
25MAR2022 | 630-00146 B
5
INTRODUCTION
STRATOS WITH ENCLOSURE: SECTION 2
SECTION 2
INTRODUCTION
DEVICE NAME:
STRATOS WITH ENCLOSURE
PLATFORM LIFT
Indications of Use: The Stratos with Enclosure
Platform Lift is to assist the transfer of patients or
mobility impaired persons and their mobility device,
up and down levels of a commercial facility or
residence.
READ AND UNDERSTAND
This manual provides instructions for proper use
and maintenance of your Vertical Platform Lift.
Please refer to this Owner’s Manual for operating
instructions. Any alterations to the equipment
without written authorization by the manufacturer
is prohibited and will void the warranty.
PURCHASING INFORMATION
If you have questions concerning the operation and
maintenance of your platform lift, please contact
your dealer.
Please ensure that you fill out the separate warranty
form and return it within ten (10) days of installation
to register your lift.
TECHNICAL SPECIFICATIONS
Visit ameriglide.com for specifications on your lift
model.
CODE STATEMENT
Your lift has been designed to meet ASME A18.1
“Safety Standard for Platform Lifts and Stairway
Chairlifts” under section 2 or section 5 and has been
certified to CAN/CSA-B44.1/ASME A17.5 “Elevator
and Escalator Electrical Equipment”.
Code requirements for Vertical Platform lifts may
vary depending on location. It is the installer’s
responsibility to contact their state, city or local
code enforcement office and determine all the
regulations the lift and installation are subject to.
This must be done before installing the Vertical
Platform Lift.
AmeriGlide Vertical Platform Lifts are to be installed
in accordance with all applicable codes and in
accordance with ASME A18.1, ASME A17.5 and CAN/
CSA-B44.1.
The Vertical Platform Lift units are intended for a
maximum operation of 24-cycles per hour for units
up to 101" and 12-cycles per hour for units greater
than 101".