AmeriGlide STRATOS, Руководство пользователя

Страница: 15 / 24

STRATOS WITH ENCLOSURE:
Owner’s Manual
25MAR2022 | 630-00146 B
15
MAINTENANCE
STRATOS WITH ENCLOSURE: SECTION 6
COMMERCIAL APPLICATION
END-USER/MAINTENANCE
IMPORTANT: Understanding State/Local Inspection
Requirements & Timing - Always Required.
Before Use: Do not use lift until these conditions
are rectified.
• Check the dielectric grease on the board
and verify all open connections are greased/
covered.
•
All doors and gates are locked and secure.
• Check for standing water around the unit.
•
Make sure AC connections are in good
condition and that there are no cracks or gaps
in conduit.
• Make sure there are no obstructions intruding
in the path of the lift.
− People, tree branches, loose items, etc.
• Check that there is no loose hardware or
emerging cracks/deformations in the platform
and tower.
Owner/Owner’s Agent:
•
Check and ensure that the safety pan (optional)
under the platform moves freely up and down
and is not damaged. This is the built-in safety
device designed to detect obstructions under
the platform and stop platform downward
motion. If there is an easy-to-remove
obstruction, please remove it. If for any reason
the safety pan does not move as intended,
please contact your dealer.
• Check and ensure that all labels are intact and
legible. If any safety or warning labels need to
be replaced, please contact your dealer.
• Make sure you have a copy of the Owner’s
Manual. A digital copy of the Owner’s Manual is
available at ameriglide.com.
• Check your key locks and emergency stop
button for functionality.
•
Check for any rust that may be developing.
Rust is expected in outdoor applications
(especially in coastal areas), but with
proactive maintenance or quick repair, this
can be minimized. AmeriGlide recommends
(weatherizing) the unit to prevent this from
occurring.
Dealer:
• Follow OPERATIONAL CHECK section of the
“Install and Service Manual” for the lift if
periodic operational checks are required.
DEALER MAINTENANCE
SCHEDULE
RECOMMENDED EVERY 6-MONTHS
•
Check for motor gearbox leaks
•
Check wear pads for gaps
• Check all structural connections/hardware
• Inspect the safety brake
•
Check the Battery Backup function (if installed)
•
Ensure the Power Cut-Off system works as
intended
• Check all interlocks, strikes and obstruction
sensors
• Check for debris and signs of excessive wear
around ACME nuts.
•
Clean and grease the lead screw.
(Use only Nook PAG-1 ACME Screw Grease)
RECOMMENDED ANNUALLY
• Replace batteries (if equipped)
Enclosure:
• Screw drive should be inspected annually for
grease/ grease adequately if necessary
•
Safety switches should be checked for
functionality
•
Depending on geographical area, unit may