background image

© American Time & Signal Co.

Appendix

Maintenance

Code Blue

Operation

Contr

ol Station

Clock/Timer

7

Control Station Switch Functions

Run/Set Switch 

-

 

Set Position: 

This position is used to set a preset up or down counting time (Timer). It is also used  

 

 

to reset the Code Blue timer.

 

 

This position is not used for setting time. The controller will allow you to enter in  a  

 

 

12/24 hour mode and set a time. However the time will be controlled and updated by  

 

 

the SiteSync IQ system controller.   

 

Run Position: 

This position is used to permit Clock/Timer to operate.

Up/Clock/Down Switch 

-

 

Up Position: 

This position is used to choose up counting elapsed timer mode.

 

Clock Position:   This position is used to choose clock mode.

 

Down Position:   This position is used to choose down counting elapsed timer mode.

Start/Stop/Increment Switch 

-

 

This button is used to start, stop, and resume timer count, when Run/Set Switch is in the Run position  

 

(Code Blue timer can only be stopped).

 

This button is also used to increment/advance the number value being set when the Run/Set Switch  

 

is in Set position.

Reset/Enter Switch 

-

 

This button is used to used to return a timer (excluding the Code Blue timer) to the beginning of its  

 

count, when the Run/Set Switch is in Run position.

 

This button can also be used to select a field (i.e. format, minute digits, hour digits) when the Run/ Set  

 

Switch is in Set position.

START/STOP          RESET

INCREMENT          ENTER

RUN

SET

UP

DOWN

CLOCK

RESET

ENTER

RUN

SET

UP

DOWN

CLOCK

START/STOP

INCREMENT

Содержание SiteSync IQ SQA261RSAES

















Отзывы: