StorTrends® 1300 Set Up Guide
7
Installing the Server into a Telco Rack
To install the StorTrends 1300 into a Telco type rack, use two L-shaped brackets on
either side of the chassis (four total). First, determine how far the server will extend out
the front of the rack. Larger chassis should be positioned to balance the weight between
the front and the back. If a bezel is included on your server, remove it. Attach the two
front brackets to each side of the chassis, then the two rear brackets positioned with just
enough space to accommodate the width of the Telco rack. Finish by sliding the chassis
into the rack and tightening the brackets to the rack.
Содержание StorTrends 1300
Страница 9: ...StorTrends 1300 Set Up Guide 9 Accessing the Inside of the System...
Страница 21: ...StorTrends 1300 Set Up Guide 21 Do not close the window or click anywhere else until the operation completes...
Страница 35: ...StorTrends 1300 Set Up Guide 35 Step Seven All Done No Errors STOP YOU SHOULD NOW BE UP AND RUNNING...
