StorTrends® 1300 Set Up Guide
16
Use the following instructions as a basis.
Note:
The
Quick and Easy Setup Wizard
will select all the physical hard disk drives present in
the StorTrends® iTX Storage Appliance to create the RAID array. SAN and NAS
volume names are automatically generated. A default
NAS
Share
is also automatically
created. In the
Quick and Easy Setup Wizard
the SAN and NAS Volumes are configured
to use Exact Provisioning. Twenty percent of the physically available hard disk space
should be reserved if you are planning to use snapshot storage.
Step One: Quick Start Setup Wizard
If the storage has not been configured on your Storage Appliance, you will be prompted
to run the
Wizard
. Click the
Quick Start Setup
option, and then click
Next
.
Содержание StorTrends 1300
Страница 9: ...StorTrends 1300 Set Up Guide 9 Accessing the Inside of the System...
Страница 21: ...StorTrends 1300 Set Up Guide 21 Do not close the window or click anywhere else until the operation completes...
Страница 35: ...StorTrends 1300 Set Up Guide 35 Step Seven All Done No Errors STOP YOU SHOULD NOW BE UP AND RUNNING...
