American Megatrends Baby Voyager 80486 Скачать руководство пользователя | Manualshive

Страница: 42 / 83

background image

Chapter 3 - BIOS POST

36

Error Message

Explanation

Type Mismatch

detected by AMIBIOS. Run AMIBIOS Setup.

CMOS Memory
Size Mismatch

The amount of memory on the motherboard is different
than the amount in CMOS RAM. Run AMIBIOS Setup.

CMOS Time &
Date Not Set

Run STANDARD CMOS SETUP to set the date and time
in CMOS RAM.

D: Drive Error

No response from hard disk drive D:. Drive D: may be
missing. If installed, run the Hard Disk Utility. Also, check
the D: hard disk type in STANDARD CMOS SETUP to
make sure that the hard disk drive type is correct.

D: drive failure

No response from hard disk drive D:. Replace drive D:.

Diskette Boot
Failure

The boot disk in floppy drive A: is corrupt. It cannot be
used to boot the system. Use another boot disk and
follow the screen instructions.

Display Switch
Not Proper

Some systems require that a video switch on the
motherboard be set to either color or monochrome. Turn
the system off, set the switch properly, then power on.

DMA Error

Error in the DMA controller on the motherboard.

DMA #1 Error

Error in the first DMA channel on the motherboard.

DMA #2 Error

An error occurred in the second DMA channel on the
motherboard.

FDD Controller
Failure

AMIBIOS is not able to communicate with the floppy disk
drive controller. Check all appropriate connections after
the system is powered down.

HDD Controller
Failure

AMIBIOS cannot communicate with the hard disk drive
controller. Check all connectors after the system is
powered down.

INTR #1 Error

Interrupt channel 1 has failed POST.

INTR #2 Error

Interrupt channel 2 has failed POST.

Invalid Boot
Diskette

AMIBIOS can read the diskette in floppy drive A:, but it
cannot boot the system with it. Use another boot diskette
and follow the screen instructions.

Keyboard Is
Locked...Unlock
It

The keyboard lock on the system is engaged. The
system must be unlocked to continue the boot process.

Keyboard Error

Timing problem in the keyboard. Set

Keyboard

in

STANDARD CMOS SETUP to

Not Installed

, which skips

the keyboard POST routines.

KB/Interface
Error

Error in the keyboard connector on the motherboard.

No ROM BASIC

Cannot find a proper bootable sector on either drive A: or
hard disk drive C:. ROM Basic (INT 18h) does not run.
AMIBIOS cannot find ROM Basic.

Off Board Parity

Parity error in adapter card memory. The format is:

«
...
40
41
42
43
44
...
»

Содержание Baby Voyager 80486




















































































Отзывы:

Нет отзывов

Похожие инструкции для Baby Voyager 80486

Бренд: Ublox Страницы: 2

Бренд: u-blox Страницы: 24

Бренд: AXIOMTEK Страницы: 2

Бренд: Linear Technology Страницы: 6

Бренд: IEI Technology Страницы: 126

Бренд: MSI Страницы: 94

IONITX-N series

Бренд: Zotac Страницы: 50

Бренд: AOpen Страницы: 8

Бренд: Microchip Technology Страницы: 31

Бренд: Texas Instruments Страницы: 11

Бренд: Bartels Mikrotechnik Страницы: 9

Бренд: ASROCK Страницы: 2

Бренд: RIB Страницы: 12

Бренд: Gigabyte Страницы: 39

Бренд: Liantec Страницы: 4

Spacewalker AV40

Бренд: Shuttle Страницы: 81

Бренд: ST Страницы: 14

Бренд: ST Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды