manualshive.com logo in svg

American Megatrends Baby Voyager 80486, Руководство пользователя

Поделиться
Скачать
American Megatrends Baby Voyager 80486 Скачать руководство пользователя страница 2

Preface

ii

                

© Copyright 1993 American Megatrends, Inc.

All rights reserved.
American Megatrends, Inc.
6145F Northbelt Parkway
Norcross, GA 30071

This publication contains proprietary information which is protected by copyright. No
part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language or computer language, or transmitted in any form
whatsoever without the prior written consent of the publisher, American Megatrends,
Inc.

Limited Warranty

Buyer agrees if this product proves to be defective, that American Megatrends, Inc. is
only obligated to replace or refund the purchase price of this product at American
Megatrend's discretion according to the terms and conditions of the warranty card
accompanying the American Megatrends Super Voyager LC motherboard. American
Megatrends shall not be liable in tort or contract for any loss or damage, direct,
incidental or consequential. Please see the Warranty Registration Card shipped with
this product for full warranty details.

Limitations of Liability

In no event shall American Megatrends be held liable for any loss, expenses, or
damages of any kind whatsoever, whether direct, indirect, incidental, or consequential,
arising from the design or use of this product or the support materials provided with the
product.

Trademarks

American Megatrends acknowledges the following trademarks:

Intel and i486 are registered trademarks of Intel Corporation.
MS-DOS, Xenix, and Microsoft are registered trademarks of Microsoft Corporation.
IBM, AT, VGA, OS/2, and EGA are registered trademarks of International Business
Machines Corporation. XT and CGA are trademarks of International Business
Machines Corporation.
Fujitsu is a registered trademark of Fujitsu America, Inc.
Hitachi is a registered trademark of Hitachi America, Ltd.
FasMath is a trademark of Cyrix Corporation.
Motorola is a registered trademark of Motorola Corporation.
Oki is a registered trademark of Oki America, Inc.
NEC is a registered trademark of NEC Corporation.
Samsung is a registered trademark of Samsung Electronics Corporation.
Siemens is a trademark of Siemens Corporation.
Mitsubishi is a registered trademark of Mitsubishi Electronics of America.
Unix is a registered trademark of American Telephone and Telegraph Company Bell
Laboratories.

Содержание Baby Voyager 80486




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды