PARTS REQUIRED
4pcs -
H6
Phillips Round Head Screw
1pc -
P6
Support Brace
1pc -
P1
Main Cabinet
PARTS REQUIRED
8pcs -
H2
Hex Head Bolt
8pcs -
H4
Lock Washer
8pcs -
H3
Flat Washer
2pcs -
P3
Middle Leg
2pcs -
P4
Upper Leg
STEP 1
Attach the
P6
Support Brace onto the
P1
Main Cabinet using the
H6
Phillips Round Head Screws as shown in
FIGURE 1.
STEP 2
Attach the
P4
Upper Leg,
P3
Middle Leg onto the
P1
Main Cabinet using the
H2
Hex Head Bolts,
H3
Flat Washers and
H4
Lock Washers as shown in
FIGURE 2.
FIGURE 1
FIGURE 2
©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
6
All Rights Reserved.
Tighten H6 Screws using the Phillips Driver.
Do not tighten Bolts at this time.
H2
H4
H3
H3
H2
H4
P3
P4
H2
H4
H3
H3
H2
H4
P3
P4
Hold the angle of the leg
both flat and flush with the
cabinet inner sides.
All edges must be
assembled “FLUSH”
with each other.
P1
H6
P6
Use the pilot holes
inside of main cabinet.
FIGURE 1
