©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
10
All Rights Reserved.
INSTRUCTIONS FOR LEVELING A SHUFFLE BOARD TABLE
Assemble shuffle board table according to the instructions.
Any type of level would be sufficient to perform this procedure. However, both one foot and two foot
levels are recommended.
Before leveling, make sure level is placed on the playing surface, not the top rails.
Level the ends
and adjust the height by placing shims (A8) underneath the leg opposite of which
the bubble in the level favors until the bubble rests in the middle of the level.
Repeat the step above for the opposite end.
Next, level the length of the table. Place the level on middle of playfied and adjust the
height to position the bubble in the middle of the level, using the shims beneath the leg
opposite of which the bubble in the level favors.
Repeat the step above to the opposite length of the table.
Recheck both short ends to ensure bubble are in the middle on the level.
Depending on the surface the shuffle board table sits, especially deep pile carpenting, the
shuffle board table needs to settle for 24 hours. Recheck the level on each side of the table
after 24 hours.
UN-LEVEL
UN- LEVEL
LEVEL
Add Shim
Add Shim
