©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
9
All Rights Reserved.
C1
C2
A4
C3
C3
C1
C2
C2
Replacement of LED Light Strip
STEP THREE :
Install the replace LED Strip
C1/ C2
back
to the Cabinet Side Rail.
Align the male and female connectors of the well Lighting LED Strip
.
Connect the plug of
C1
Lighting LED Strip A
, C2
Lighting LED Strip B with
C3
ON/OFF Switch Wire.
Next, connect the
A4
AC/ DC Adapter with
C3
ON/OFF Switch Wire.
STEP ONE :
Should the LED lights not be working in the rail - Firstly , make sure the wall outlet cord is plugged in to a live A/C
outlet properly. Secondly , make sure the A/C Adapter
(A4)
is tightly plugged in to its outlet under the table .
Lastly, make sure all LED Rail light connections are snuggly plugged into the Main Electronic Unit
(C3)
. At this point ,
should the LED Rail Lights still not be working , please disconnect the A/C power to the table before proceeding .
A call will be required to our Customer Service Department
to acquire the necessary replacement part(s) .
STEP TWO :
If the LED Light Strip needed to be replaced on
the
P1
Cabinet inner side, take the
C1/C2
LED Light
Strip out of the table.
C1/C2
