©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
8
All Rights Reserved.
THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
PARTS REQUIRED
2pcs -
P7
Manual Scorer
Attach the
P7
Manual Scorers into the pilot holes on the top rail using the
H5
Flat Head Screws
as shown in
FIGURE 5.
STEP 5
H5
P7
H5
P7
Note: Bowling Pin
Block is designed to
help keep the pins on
the table during play.
A6
A7
Pilot Holes
1pc -
P8
Bowling Pin Side Block-A
1pc -
P9
Bowling Pin Back Block
4pcs -
H5
Phillips Flat Head Screw
6pcs -
H6
Phillips Flat Head Screw
1pc -
P10
Bowling Pin Side Block-B
Attach the
P8
Bowling Pin
Side Block-A and the
P10
Bowling Pin Side Block-B
onto the
P9
Bowling Pin Back
Block using the
H6
Phillips
Flat Head Screws as shown
in
DETAIL A
.
Tighten, but DO NOT
strip out screws.
DETAIL A
FIGURE 5
H6
H6
P10
H6
H6
P8
P9
Plug A4 AC/DC Adapter here.
Do not allow Adapter cord to become
a trip hazard
.
Unplug A/C Adapter after each use.
A4
AC/DC
Adapter
C3 ON/OFF
Switch