American Flame: E-Stop Gas Timer
REV. 12-28-17
4 5/16”
TYP
2 15/16”
TYP
CL
CL
CL
CL
3/16 - 24
Mounting Hole
3/16 - 24
Mounting Hole
3/16 - 24
Mounting Hole
3/16 - 24
Mounting Hole
PUSH TO STOP
TURN TO START
OFF
TURN
PAST
20
40
60
MINUTES
BACK VIEW
4”
2 7/8”
2¹/8”
³/32”
Fig. 1
E-Stop Gas Timer mounting hole locations applicable to both models.
Mounting
The E-Stop Gas Timer has the ability to be mounted from the side of the body, using the four (4) provided holes (two
mounting holes per side) or using the two mounting hole tabs at the top and bottom of the body when facing forward.
Each mounting hole uses 3/16 - 24 machine screws to secure it into position. Note: We recommend using stainless steel
screws for any outdoor applications. See Fig. 1 for details.
2.0” Inlet @ 1.0” Outlet =
0.5
1.0
1.5
2.0
2.5
3.0” Inlet @ 1.5” Outlet =
4.0” Inlet @ 2.0” Outlet =
250,000 275,000 300,000 325,000 350,000 375,000 400,000
Btu/Hr
Pressure Drop & Capacity Curve
E-Stop Timer (LP Gas)
5.0” Inlet @ 2.5” Outlet =
3.0
425,000 450,000
Note:
Pressure drop information listed is generated in American Flame lab and is to be used as reference only.
Table 2
Pressure drop and capacity for LP Gas).
2.0” Inlet @ 1.0” Outlet =
0.5
1.0
1.5
2.0
2.5
3.0” Inlet @ 1.5” Outlet =
4.0” Inlet @ 2.0” Outlet =
150,000 175,000 200,000 225,000 250,000 275,000 300,000
Btu/H
Pressure Drop & Capacity Curve
E-Stop Timer (Natural Gas)
Table 1
Pressure drop and capacity for Natural Gas.
