American Dynamics RAS915LS, Руководство оператора

Страница: 61 / 124

Configuring Text Displayed On-Screen 5–9
7. Move the blinking highlight around the available characters. When the correct character is
highlighted, press
Focus
to select it.
If you make a mistake, Zoom In moves the cursor one space right, and Zoom Out moves the
cursor one space left in the name.
8. Repeat step 7 until the name is complete.
9. Do one of the following:
•
To save the name changes, select
Exit
.
•
To discard the name changes, select Undo Changes and Quit .
10. Do one of the following:
•
If you were changing the camera name, continue with step 12.
•
If you were changing the name of an area, preset, pattern or alarm, the
Select Name to
Program
screen appears. Continue with step 11.
11. Do one of the following:
•
To make additional changes to the same type of name selected in step 3, repeat steps 4 through
10.
•
To return to the
Name Configuration Menu
, select
Exit
, and continue with step 12.
12. Do one of the following:
•
To make additional name changes, repeat steps 3 through 11.
•
To return to
On-Screen Text Display
, select
Exit
. Continue with step 13.
13. Select
Exit
. The
Dome Configuration Menu
appears. Continue with What To Do Next on page
5–11.
Changing the Settings for Text Displayed On-Screen
You may customize the way text is displayed on-screen. You have the choice of displaying text as
translucent (slightly clear) or solid, with or without outlines. To change these settings, select
Text
Attribute Options from the On-Screen Text Display screen. The following screen appears:
TEXT ATTRIBUTE OPTIONS
CHARACTER OUTLINE ON/OFF
TRANSLUCENT NAMES ON/OFF
EXIT
Figure 5-7 illustrates the types of text attributes available.