background image

 

SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY 

8200-0184-09, REV. A 

OPERATOR’S MANUAL SUPPLEMENT 

1 of 13

 

SpeedDome

®

 Ultra VII 

Camera Dome 
Configuration Utility 

Operator’s Manual Supplement 

 

 

RAS915/RAS916/RAS917 Series 

Contents 

About this Supplement .......................................... 1

 

New SpeedDome Ultra VII Features..................... 1

 

Quick Set Menu..................................................... 2

 

Auto Iris/Auto Focus Resume Setting ................... 3

 

Scan Limits ............................................................ 4

 

AD Up-the-Coax Protocol...................................... 5

 

SensorNet and RS-422 Matrix Switchers and 

Controllers ........................................................ 6

 

Panasonic UTC Protocol Preset Programming..... 9

 

Specifications-SDU VII ........................................ 10

 

Specifications-22X Camera................................. 11

 

Specifications-23X Day/Night Camera................ 12

 

Declarations ........................................................ 13

 

 

 

© 2004 Sensormatic 

About this Supplement 

This supplement provides detailed information 
about SpeedDome Ultra VII camera dome features 
that are not currently covered in your operator’s 
manual. This supplements information found in the 
following manuals: 

• 

22x Camera Dome Configuration Utility 
Operator’s Manual, 8200-0184-02 

• 

Day/Night Camera Dome Configuration Utility 
Operator’s Manual, 8200-0184-04 

NOTE:

 Keep this supplement with your operator’s 

manual for reference purposes. 

If you need assistance... 

Contact your Sales Representative. 

New SpeedDome Ultra VII 

Features 

SpeedDome Ultra VII provides the following 
features with firmware version 0710-0147-0106 
and newer.  

• 

Quick Set Menu for accessing commonly used 
dome settings 

• 

Auto Iris/Auto Focus resume settings  

• 

Scan Limits for establishing start and stop points 
for monitoring a specific area 

• 

AD Up-the-Coax protocol for compatible 
American Dynamics controllers 

In addition, updated information is provided for the 
following: 

• 

SensorNet and RS-422 matrix switchers and 
controllers 

• 

Preset programming instructions for the 
Panasonic WJ-SX550 multiplexer and 
WV-CU550A controller 

Содержание RAS915














Отзывы: