American Dynamics ADR8045X, Инструкция по эксплуатации

Страница: 15 / 52

NOTICE
PLAYBACK
OPERATION
RECORDING
OPERATION
PREPARATION
14
INTRODUCTION
ENGLISH
ON-SCREEN FUNCTIONS
When the power is turned ON, the time and date modes are displayed on the monitor screen (live picture). On-screen displays are
not available in the event of no video input signal.
Date-Time Display
VTR display
Monitor screen
1
Date : Displayed with the day-month-year.
2
Day of the week : Automatically set to the correct day of the week when the date is set.
3
Time : Set to 24-hour cycle at factory.
It is possible to modify to 12-hour (AM/PM) cycle display.
4
Playback/Recording Time : Playback or Recording time display
On-Screen Position
Press the LOCATION SELECT button to adjust the display to desirable position.
The display moves in the direction shown by the arrows.
17:30:02 A 3
28/8/96 WED
However, during the date-time display screen, pay attention to the following when
setting the date and time display positions:
When the display is set to an end of the monitor screen as shown in the figure,
synchronization instability or color flickering may occur in some monitor TVs.
17:30:02 A 3
28/8/96 WED
17:30:02 A 3
28/8/96 WED
17:30:02 A 3
28/8/96 WED
28/8/96 WED
17:30:02 A 3
Playback/Recording time
Time 3
Date 1 Day of the week 2
4
17:30:02 A 3
28/8/96 WED
17:30:02 A 3
Press this button : To down
Press this button : To right
LOCATION SELECT
ENGLISH