Page 18
© American Access Systems
Event Input -- Sub-Mode 9
DETAILS
:
Programming Sub-Mode 9 allows a user with Master Code privileges
to program the unit to
connect to an external device to control a specific function.
(MAYBE PUT AN EXAMPLE HERE)
Note:
Relay A codes can be turned off by an external switch. When inactive, all Relay “A” codes will be
disabled. However, the Relay “B,” program and function codes will continue to be accessible to the
Master user.
NOTE:
If you
do not
wish to toggle the MODE that the unit reports, enter
pound
(#)
key
to exit.
Event Input
can be programmed 4 separate ways:
1.
To program
Event Input
as
Remote Inactive
:
-
Enter the MASTER CODE
-
Unit will sound a GOOD TONE
-
Enter the numeral 9 (Unit will sound the Current Mode*)
-
Unit will sound a GOOD TONE
-
Enter the numeral 1
-
Unit will sound a GOOD TONE
(DEFINE 1,2,3)
2.
To program the
Event Input
as an
Arming Circuit:
-
Enter the MASTER CODE
-
Unit will sound a GOOD TONE
-
Enter the numeral 9 (Unit will sound the Current Mode*) followed by a GOOD TONE
-
Enter the numeral 2
-
Unit will sound a GOOD TONE
3.
To program the
Event Input
as
Remote Open:
-
Enter MASTER CODE
-
Unit will sound a GOOD TONE
-
Enter the numeral 9 (Unit will sound Current Mode*) followed by a GOOD TONE
-
Enter the numeral 3
-
Unit will sound two quick tones in succession then wait for input
-
Enter the Relay to Activate
Содержание ADV-1000
Страница 5: ...Page 5 American Access Systems ...
Страница 22: ...Page 22 American Access Systems Event Input ...
