American access system ADV-1000, Инструкция по установке и эксплуатации

Страница: 14 / 24

Page 14 © American Access Systems
Delete Individual Access Codes -- Sub-Mode 2
To delete programmed Access Codes:
-
Enter the Master Code
-
Unit will sound a GOOD TONE
-
Enter the numeral 2
-
Unit will sound a GOOD TONE
-
Enter the Access Code you want to delete
-
Unit will sound a GOOD TONE
-
An ERROR TONE indicates that Access Code is not in the memory
-
If you make an entry error, simply press the star (
Å
) key then enter the correct code
-
Continue to enter Access Codes you wish to delete
OR
-
Enter pound
(#)
to exit the programming mode
NOTES:
-
You can delete any Access or Function code that you wish with the exception of the MASTER
CODE.
-
If the code you want to delete is not found in memory, the unit will respond with an ERROR
TONE and wait for another code to be entered.
-
A GOOD TONE will sound once the code has been found and deleted.
-
You may continue deleting codes until you are done, then press the pound
(#)
key to exit the
programming mode.
Change the Master Code -- Sub-Mode 3
To change the Master Code:
-
Enter the current Master Code
-
Unit will sound a GOOD TONE
-
Press the numeral 3
-
Enter a new Master Code
-
Unit will sound a GOOD TONE
-
If you make an entry error, simply press the star (
Å
) key and enter the number you wish
-
Press the pound
(#)
key to exit the programming mode