- 26 -
5.2.2
PTZ Settings
Enable PTZ
To enable PTZ control on the connected analog camera. Once the video encoder is
appropriately configured, the Live View page will display the control panel for the installed PTZ device.
Protocol:
Select one from the list of protocols, such as Pelco D, Pelco P, Li-Lin, and
ID:
Select ID of the analog camera that the video encoder intends to control.
Speed:
Select the PTZ speed (1 – 10).
Baud rate / Data bit / Stop bit / Parity / Flow control:
Depending on protocol used, the values are assigned accordingly.
