- 6 -
3
Setting up the Network Camera
3.1
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a
high-performance web-ready camera but can also be part of a flexible surveillance system. It is the user’s
responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use.
It is important to first verify that all contents received are complete. Take note of the warnings in the Quick
Installation Guide before the Network Camera is installed; then carefully read and follow the instructions in the
Installation chapter to avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended. It is designed for various applications including video sharing, general security/surveillance,
etc.
3.2
Hardware Installation Steps
After unpacking the package and identifying its parts, assemble the network camera to run the device for the first
time.
It is recommended set up the camera before installing it to the intended location.
The following instructions will consist of basic steps that will help you through the hardware preparation.
Other required devices before powering up the Network Camera:
1.
Personal Computer or Laptop; and
2.
Network Hub or Switch and 2 (two) pieces of Ethernet Cable; or
3.
1(one) piece of Crossover Ethernet Cable
Using a CS Type Mount Lens
Use a CS Type Mount Lens for the Network Camera. It is recommended using megapixel lenses, supporting a pixel
size of 2.8μm x 2.8μm, 1/3” inch size.
There are two mini screw holes around CS mounting ring. Use the two provided CS lens mounting screws to mount
a CS lens.
