Front Panel
NVR11H/11H-P/41H/41H-8P
1
1. Front Panel and Rear Panel
Front Panel
NVR11H/11H-P/41H/41H-8P
Note
: For detailed operating instructions, please refer to the User‟s Manual on the included CD
or found on the product listing online:
http://amcrest.com/ip-security-camera-systems.html/
The front panel is shown in Figure 1.
Figure 1
Please refer to the following chart for information on the front panel buttons
#
Icon
Name
Function(s)
1
ALARM
Alarm status
indicator light
When an alarm event occurs, this LED becomes
blue to alert you.
2
REC
Recording
status indicator
light
When the NVR is recording footage to the hard
drive, this LED will become blue to alert you.
3
HDD
HDD status
indicator light
When an HDD error occurs or the HDD capacity is
below the specified threshold, this LED becomes
blue to alert you.
4
NET
Network status
indicator light
When a network error occurs or there is no network
connection, this LED becomes blue to alert you.
5
ACT
ENTER
Confirms the current operation.
6
POWER
Power status
indicator light
When the NVR is powered on, this LED will remain
blue.
7
Power button
Press and hold the power button for 3 seconds to
boot up or shut down the NVR.
8
�
/
�
Up/Down
Activates current controls, modifies settings, and
allows navigating up and down through options.
Increases/Decreases numerals.
-Assists in functions such as PTZ menu.
9
<
/
>
Left/Right
Shifts current activated controls.
When in playback, use these buttons to control the
playback bar.
ENTER
Enter
Confirms the current operation.
