Motion Detection & Recording Setup
Setting up recording schedules
30
9.
Now that you‟ve finished configuring the recording schedules, you may need to
copy these settings over to another channel (or camera). By default, Channel 1 will be
selected when you visit this page. Unless you immediately selected
All
in the channel
window from step 4 above, note that you can copy these settings directly over to another
channel by clicking
Copy
down below:
In the
Copy
window, you can select individual channels for any cameras you have added
to the NVR or select
All
:
Click
OK
when finished.
10. When finished on this screen, click
Apply
to save your changes.
