5
is imperative to make sure to mount the cameras properly and position them as efficiently as you can to the areas
you wish to monitor. All positioning actions to the camera will have to be performed manually.
Device Overview
The image below shows the structure of the camera:
The images below show the dimensions for the camera. The measurements are in millimeters
(mm):
To access the reset button and to adjust the camera angle, use a Torx/Hex wrench to open the camera assembly by
removing the 3 screws.
For reference, a Torx/Hex screwdriver tip looks like this:
Connection & Installation
This section provides information about the connection and installation of your camera.
