37
At the top of the
Disk Manager
window you can select what happens when the disk you’ve allocated gets full. Two
options,
Stop Record
to end all recordings after the disk is full or
Overwrite
to continue to save over the oldest
recorded data.
You’ve successfully added your camera to Amcrest Surveillance Pro, turned your computer into a PC
-NVR and have
the camera recording any or all the motion events you have set up internally on the cameras main interface.
How to Setup Recording
The Amcrest Surveillance Pro software allows you the opportunity to set your added device to record on motion or
on continuous (general) recording. You can also set recording schedules for your device.
Storage
To begin setting up recording settings for your device, a microSD card or PC-NVR must be established to storage
the recordings. When a storage device has been established in your device, navigate to the
Home Page
and click
on the
Device CFG
icon in the settings menu. Select the device you wish to configure and in the
Storage
field, click
on the
Record
icon.
