116
Below is a description of each field in this menu:
•
Enable
: Allows the user to enable the relay activation function
•
Relay
-
In
: Allows the user to set specific relayed alarms to the camera.
•
Schedule
: Clicking this button opens a weekly schedule that can be used to set times.
Click and drag to set motion detection for certain days of the week. Also, periods of motion detection can be set
for each day and enabled using the period settings on the bottom half of the screen. There are a total of 6 periods
that can be set.
•
Anti-Dither
: This field allows the user to set the anti-dither time. The values in this field can range from 5 to 600
seconds. This time value controls how long the alarm signal lasts. Based on motion detection, a buzzer can go off, a
tour can begin, , a snapshot can be taken, or the camera can begin recording.
For example, if the anti-dither time is set to 10 seconds, each alarm may last 10 seconds if the local alarm is
activated. During the process, if the system detects another local alarm signal at the fifth second, the buzzer, tour,
snapshot, record channel functions will begin another 10 seconds while the screen prompt, alarm upload, email
will not be activated again. After 10 seconds, if system detects another alarm signal, it can generate a new alarm
since the anti-dither time has expired.
•
Record
: This checkbox allows the user to enable the camera to record video when an audio detection alarm is
triggered.
•
Record Delay
: his field specifies in seconds how long the delay between alarm activation and recording should be.
•
Relay Out
: This checkbox allows the user to enable the camera to trigger an alarm when an alarm is detected.
•
Send Email
: This checkbox allows the user to enable the camera to send an email when an audio detection alarm is
triggered.
