Amcrest General 1080P(V2) Mini 1U Series, Руководство пользователя

Страница: 78 / 188

69
4.10.2.6 Email
The email interface is shown as below. See Figure 4-45.

SMTP server: Please input your email SMTP server IP here.

Port: Please input the corresponding port value here.

User name: Please input the user name to login to the sender email box.

Password: Please input the corresponding password here.

Sender: Please input sender email address here.

Subject: Please input email subject here. System supports English character and Arabic number.
Max 32 characters.

Receiver: Please input receiver email address here. System supports a max of 3 email addresses.
System automatically filters same addresses if you input one receiver repeatedly.

SSL enable: System supports SSL encryption.

Health email enable: Please check the box here to enable this function. This function allows the
system to send out the test email to check the connection is OK or not.

Interval: Please check the above box to enable this function and then set the corresponding interval.
System can send out the email regularly as per what you set here. Click the Test button. You can
see the corresponding dialogue box to see if the email connection is OK or not.
Please note the system will not send out the email immediately when the alarm occurs. When the alarm,
motion detection or the abnormity event activates the email, system sends out the email according to the
interval you specified here. This function is very useful when there are too many emails activated by the
abnormity events, which may result in a heavy load for the email server.
Figure 4-45
4.10.2.7 FTP
You need to download or buy a FTP service tool (such as Ser-U FTP SERVER) to establish a FTP
service. Please install Ser-U FTP SERVER first. From
“Start” -> “All Programs” -> Serv-U FTP Server ->