Amcrest General 1080P(V2) Mini 1U Series, Руководство пользователя

Страница: 131 / 188

122
Figure 5-22
Please refer to the following sheet for detailed information.
Parameter Function
Max connection This is the max web connections to the same device. The value
ranges from 1 to 120. The default value is 120.
TCP port The default value is 37777. You can input the actual port
number if necessary.
UDP port The default value is 37778. You can input the actual port
number if necessary.
HTTP port The default value is 80. You can input the actual port number if
necessary.
HTTPS
The default value is 443. You can input the actual port number
if necessary.
RTSP port The default value is 554.
5.8.2.3 PPPoE
The PPPoE interface is shown as in Figure 5-23.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
the PPPoE function. Please save the current setup and then reboot the device to get the setup activated.
The device connects to the internet via PPPoE after the reboot. You can get the IP address of the WAN
from the IP address column.
Please note, you need to use the previous IP address on the LAN to login the device. Please go
to the IP address item via the device
’s current device information. You can access the client-end
via this new address.