Amcrest General 1080P(V2) Mini 1U Series, Руководство пользователя

Страница: 67 / 188

58
Figure 4-37
4.10 Setting
4.10.1 Camera
4.10.1.1 Camera
The camera interface is shown as below. See Figure 4-38.

Channel: Select a channel from the dropdown list.

Saturation: Used to adjust monitor window saturation. The value ranges from 0 to 100. The default
value is 50. The larger the number, the strong the color is. This value has no effect on the general
brightness of the whole video. The video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white balance is not correct. Please note
the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60.

Brightness: Used to adjust monitor window brightness. The value ranges from 0 to 100. The default
value is 50. The larger the number is, the brighter the video is. When you input the value here, the
bright section and the dark section of the video will be adjusted accordingly. You can use this
function when the whole video is too dark or too bright. Please note the video may become hazy if
the value is too high. The recommended value ranges from 40 to 60.

Contrast: Used to adjust monitor window contrast. The value ranges from 0 to 100. The default
value is 50. The larger the number is, the higher the contrast is. You can use this function when the
whole video brightness is OK but the contrast is not correct. Please note the video may become
hazy if the value is too low. If this value is too high, the dark section may lack brightness while the
bright section may over expose. The recommended value ranges from 40 to 60.

Sharpness: The value here is to adjust the definition of edges in the video. The value ranges from 0
to 100. The larger the value is, the clearer the edges are and vice versa. Please note there is noise
if the value here is too high. The default value is 50 and the recommended value ranges from 40 to
60.